Jinzhou Shuangxing Co

3::. <3 /> < 3: . -Hydraulic rail gap adjuster - adjuster
-Jinzhou Shuangxing 20 years of professional manufacturing
Contact person: Manager Zhang
Address: Liaoning Songpo Road, Linghe District, Jinzhou City, Province
Office:
Fax:
Customer consultation:
Technical service:
- Striving to create the industry-leading brand Jinzhou Shuangxing
-Hydraulic rail gap adjuster - adjuster
As the earliest manufacturer of railway maintenance equipment in Liaoning, under the trend of railway science and technology development, products are constantly updated and services are constantly improved. Rail gap adjuster is a A new type of rail adjustment equipment, made entirely of forged alloy steel, with nylon insulated wheels for running, and a manual imported hydraulic pump. The overall cost performance is very high. It is divided into one-way, two-way, ton and ton. The overall cast steel hydraulic cylinder improves performance. Several times, it occupies a dominant position in rail adjustment equipment, which is mainly divided into the following models:
- Hydraulic rail gap adjuster - adjuster
- Hydraulic rail gap adjuster is suitable for various rail types The rail seam adjustment operation adopts four-pin double insurance safety measures to enhance safety performance. It has compact structure, beautiful appearance, light weight, convenient maintenance, and reasonable clamping tooth shape with sufficient static strength.
- Hydraulic rail gap adjuster - adjuster
Main technical parameters:
Name parameter
Maximum pulling force
Maximum working stroke
Machine weight
Basic structure and working principle
∠Basic structure: Mainly composed of running wheel, inclined iron, clamp body, safety pin, return spring, safety lowering device, oil tank, oil cylinder, oil pump, overflow valve, oil return valve, and tie rod composed of other parts.
The main structure is as shown in the figure: front clamp body, piston rod, 3 oil cylinders, oil return valve (the other side is the backup oil return valve), middle clamp body, tie rod, inclined iron (block), rear clamp body, large Safety pin, lever, oil pump rocker, oil tank, 3 return springs, small safety pin (piece).
(ii) - Hydraulic rail gap adjuster - adjuster
Working principle:
When increasing the rail gap (i.e. pushing the rail): use the front clamp and the middle clamp, and the rear clamp is not Participate in the work and press the hydraulic oil into the double cylinders through four plunger pumps. The pistons extend outward. After the inclined iron in the front and middle clamps clamps the two rails, the rails are pushed to increase the gap between the two rails. large, thereby achieving the purpose of adjusting the rail seam.
When narrowing the rail gap (i.e. pulling the rail): use the middle clamp concrete and the rear clamp concrete, the front clamp concrete does not participate in the work. The hydraulic oil is pressed into the double cylinder through four plunger pumps. The piston extends outward. After the inclined iron in the middle clamp body and the rear clamp body clamps the two rails through the pull rod, the rail is pulled to create a gap between the two rails. shrink to achieve the purpose of adjusting the rail gap.
-Hydraulic rail gap adjuster - adjuster
Correct use and maintenance play an important role in ensuring the normal operation of the machine and extending its service life. The operator should read this manual carefully to understand the structure of each part. and function.
(1) Inspection before use
Whether the oil level in the tank reaches /3 of the tank height. Use engine oil in summer and engine oil in winter. Filter when refueling.
Whether the control part is flexible and reliable.
Whether the oil return valve opens and closes normally, and whether all hydraulic parts work normally.
Check whether the fastening parts of each connection are loose and whether there is oil leakage.
(ii) Operation steps
Place the machine tool at the joint of the two rails being adjusted. When the rail needs to be pushed, the rail seam should be located between the front clamp body and the middle clamp body. When the rail needs to be pulled, Make the rail seam located between the middle clamp body and the rear clamp body.
, Move the control lever on the corresponding clamp body downward to make the clamp body fall on the rail.
. Tighten the oil return valve clockwise, and use the joystick to shake the rocker of the oil pump to input the hydraulic oil into the working cylinder 3. When the piston is extended, the inclined iron can clamp the rail. Continue to shake the joystick. Achieve the purpose of adjusting rail seams.
. Attention! When pushing the rail, you should gently pull the lever handle on the back clamp body upward so that the inclined iron and the rail do not touch the pull rail. The rails do not pull.
After each adjustment of the rail seam, you should first unscrew the oil return valve in the counterclockwise direction, then move the lever upward to loosen the inclined iron, so that the piston of the working cylinder is reset under the action of the tension spring, which completes a working cycle. . (This machine is equipped with two oil return valves. When one of them fails, open the other oil return valve to reset the oil cylinder, which improves the safety performance of the machine.)
After completing the operation, press upward Move the lever on each clamp body, use the pawl to drop the running wheel on the rail surface, and push it to the next rail seam or the lower track of the complete machine.
. There is a relief valve in the fuel tank, and its pressure has been adjusted before leaving the factory. When the load is too large, the relief valve unloads to ensure the safety of the machine.
If the workload of pushing the rails is large, it is recommended to remove the rear clamp body and tie rods to reduce the weight of the entire machine.
- Hydraulic rail gap adjuster - adjuster
Product selection:
- Type safety hydraulic rail gap adjuster,
Type safety hydraulic rail gap adjuster,
/> - type hydraulic rail gap adjuster,
- type hydraulic rail gap adjuster,
- type hydraulic rail gap adjuster
- hydraulic rail gap adjuster-adjuster
Our factory has recently launched many styles of road maintenance machinery, which are lower-priced and of better quality than those in the same industry. We conduct regular after-sales visits, mainly including the tamping machine series. Sleeper wrench series, track lifting machine series, rail drilling machine series, rail grinding machine series, rail gap adjuster series, square sleeper series, hydraulic rail puller series, hand tool series, line fastener series and other railway machinery products , welcome users and distributors to pay attention!
- Hydraulic rail gap adjuster - adjuster
Sold to provinces and cities:
Products are distributed in Beijing, Tianjin, Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Zhengzhou, Hubei, Hunan, Guangdong, Guangxi, Hainan, Chongqing, Sichuan, Guizhou, Yunnan, Tibet, Shaanxi, Gansu, Qinghai, Ningxia, Xinjiang Heilongjiang, Shenyang, Yulin, Jiamusi, and other regions have established stable relationships